#
7-Way Round Pin Cables
Price range: $62.25 through $224.50
Buy Now
This product has multiple variants. The options may be chosen on the product page
Quickly Troubleshoot Lighting and Air Brake Systems with the Industry’s Leading Mobile Universal Trailer Tester Head
This intuitive and durable design is ideal for both on and off-site trailer testing and repairs on emergency vehicles.
Features and Benefits:
ELECTRICAL TESTING(12/24 Volt Operation)
- Power lights: Manually, all-on, auto scan, or by remote control
- Audible and visual alerts: cross, open, overloaded and short circuit indication
- Pulsar Mode allows for chasing down short circuits without blowing fuses
- Advanced trailer wiring diagnostics
- Amperage readout and range (0-20 amps)
- Cable testing
- Ground failure detection: differentiates between wire and chassis ground
AIR BRAKE TESTING
- Performs leak-down test on service and emergency lines
- Remote control allows observation of slackers to measure and adjust pushrods
- Real-time, repetitive brake activation to find developing problems and verify leaking servo cans
REMOTE CONTROL
- (2x) 12-button remote controls test all trailer electric circuitry and air brake actuation, 200 ft. range
- Sync multiple (12) remotes to one unit
Includes:
• (2x) 12-Button Remote Control (#MUT-RM12) • 5′ 7-Way Cable (#7900K-1) • External Battery Connector with Clips(#9005A-4AS) • 8′ Red Hose with Gladhands (#7900AP-8RD-AS) • 8′ Blue Hose with Gladhands (7900AP-8BL-AS) • 500mA Battery Charger (#CHR0001) • Face/Battery Shield (#9008-4R)
Read Our Full Trailer Testing Blog Here
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Clae Joselove (verified owner) –
This trailer tester works well, my only issue is the range of the remote. Standing at the rear of a trailer with clear line of sight to the tester it will have issues switching modes. I reached out and they sent a new sensor but that didn’t help. I finally just mounted the antenna to the outside of the box and that works better. The other issue I have is there’s not battery meter for the 12v battery. It would be nice to know where the charge level is at as to not get stranded. I bought a led volt meter and wired it to the switch so when I turn on the box it tells me the battery volts. Other than that it’s a good product and I would still recommend to others with those notes.
George P Hanos (verified owner) –
PAul Eckwall, IPA Account Mgr. was extremely helpful to us in make this sale happen and go smoothly!
Thanks,
John Anayannis
President,
USAB2C.com