Description
A Complete Polishing, Transferring and Filtration System
The Fuel and Hydraulic Oil Tank Sweeper® is a mobile, turnkey solution for cleaning, transferring and filtering water and contaminants from fuel and hydraulic oil systems. Specifically designed for servicing fleet, marine, construction and agricultural equipment, the Fuel and Hydraulic Oil Tank Sweeper® removes debris, impurities, sludge, and standing or emulsified water from contaminated diesel fuel, fuel oil, hydraulic oil, motor oil, and kerosene. Additionally, use it as a preventative maintenance or service tool to extend the life of diesel fuel system components. The fully mobile unit is built with a spill-free design for a clean and complete evacuation of all fluid from machine parts, hoses, and filters. It can be used for hydraulic transmission and similar viscosity oils (with appropriate filters), as well.
Features and Benefits:
- Filter, polish, purify, decontaminate and transfer fuel and hydraulic oil on a fully mobile cart
- Innovative filter technology shows filter status and allows filter bypass for bulk transfer
- Works with small, portable air compressors as low as 4 cfm @ 22-102 psi
- Easily switch between fluids with drain-down design and integrated drip pan
- Closed-circuit hoses feature quick-disconnect fittings, allowing simple connectivity between various adapters and additional hoses
- Gives complete control over transfer rate and access to hard-to-reach areas
- Custom, detachable flow-through brush
- Ability to transfer multiple types of fluids with one unit
- NOT FOR USE WITH gasoline or other highly volatile fluids
Includes:
• (2) 30-Micron Particulate Filters (#FIL00003) • (2) 10-Micron Water-Blocking Filters (#FIL00010) • (1) 17-Micron Water Blocking Filter (#FIL00001A) • (1) 178-Micron Wire Mesh Filter (#FIL00002A) • 12′ Input Hose (#9046-INHOSE-AS) • 12′ Output Hose (#9046OUTHOSE-AS) • Quick-Disconnect Ball Valve (#9046-VALVE-AS) • Quick-Disconnect Right Angle (#9046-90DEG-AS) • Quick-Disconnect Adapter Hose (#9046-HSADPTR-AS) • 5′ 1″ Dia. Rigid Wand (#9046-INPUT-AS) • 5′ 3/4″ Dia Flex Wand (#9046-OUTPUT-AS) • 5′ 1/2″ Dia. Flex Wand (#9046-OUTPUT2-AS) • 5′ 3/4″ Dia. Flex Wand with Flow-Through Brush (#9046-BRWAND-AS) • Chassis Ground Cable (#7900K-2BCHAS) • Filter Wrench (#FIL00005) • Drip Pan (#9046-3)
